What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 24.06.2025 03:48
a photo is worth a thousand words.
so, what happens?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Gaza-bound aid boat with Greta Thunberg on board arrives in Israel after its seizure - PBS
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
What does a fuse do?
An AC voltage/ current source, and an ac inductive load.
6 early symptoms of fatty liver: What your body is telling you now - Times of India
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Which MacBook should you buy in 2025? - 9to5Mac
The third is lightning and “how it gets conducted into a home.”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This one hit behind the barn.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
nine
What is your favourite colour and why?
A circuit breaker is similar, but is resettable.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Here is a simplified AC power diagram.
How AI chatbots keep you chatting - TechCrunch
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
What can we learn from the fatal shooting of UnitedHealth CEO Brian Thompson?
One
This is 'the assistant's answer'
He then describes the function of a fuse.
Why is Meghan Markle struggling with her Hollywood connections?
For this case there are devices called Metal oxide varistors (MOV).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
What have you learned from your parents' mistakes?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
One is “what exactly is in a ‘surge protector’ ? ”
This is where the MOV conducts again, and dissipated the energy.
How to use Google's AI-powered NotebookLM — 5 tips to get started - Tom's Guide
So, the voltage could go up to 500 volts, and the fuse will not open up.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
But it can get overloaded, and no longer works.
Are you able to lie, even though you have Aspergers?
He then describes Rainy Season and Lightning.
These are simplified answers to the original question, and does not change anything I wrote above.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
What is the difference between Music.ai and Moises.ai?
but this device (an Inductor) … impedes the rapid changes in the current.
I post the exact comment here.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is where this question deviates from being a 'generic' question, and becomes more specific.
A fuse is a non-resetable over current circuit protector.
the problem then depends on "how fast does the fuse operate?".
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
The bolt then partially travels down the line to your home.
There are two important concepts here.
In schematic diagrams this is the symbol for a fuse:
what exactly is a ‘surge’ protector?
First Sentence:
At least they know the answer if they wanted it.
He then asserts :
[old diagram got deleted by accident]
This device then solves the entire problem.
2024–10–10[John johnson John Johnson ]
It seems Mohan does not understand the difference between a comment and an Answer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
[image of Common-mode choke]
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
It also is a device that limits the change in current flow.
Edit 2024–10.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
At one ohm, the resistor has a maximum of 1 watt power.
The MOV will conduct when the voltage exceeds 50% of line voltage.
(Dc diagram shown, AC is similar).
But… the neutral is now “floating” because of the 1 ohm resistance.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Because the load is inductive, the current lags the voltage.(by a bit).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Now when you have a certain ac resistance, then a current flows in a loop.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Upvotes:
These devices are installed between the “hot” and “neutral” and protective ground.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
There are three different concepts here that are getting confused.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
but I think this circuit , shows a few more pieces.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Barnstars:
The other is “what does a “fuse” do?”
eight
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
2024–10–16 [ OO OLAOYE OYEBODE ]
What is lightning?